Premiere Manufacturer of Pontoon Trailers & Aluminum Utility Trailers

Series 6 Aluminum Utility Trailers - Tandem Axle 14 to 24ft

Skip photos and view specs.

Choose Wisely. Choose Wolverine.

Specifications and Fabulous Features!

(2) 5200# Axles – galvanized steel

2 axles – 12” electric and self adjusting and includes safety self-charging breakaway switch, 


10,000#,  14 to 26ft

A-Frame, zinc plated, 14000# rating, 2-5/16″.

3″ Aluminum tube cross members on 24″ centers. OPTIONAL 12” centers.

4,000# capacity yellow zinc plated D-Ring are BOLTED though the crossmember with carriage bolts. 4 to 10 on each side. Stand spacing every 24″. OPTIONAL – As many as you wish but limited by crossmember count and location.

LED Lights, 7 terminal junction box with RV style 7 way connector

Permanent welded – won’t come loose. Fenders are 6″ from floor to top of fender and will clear vehicle door openings. OPTIONAL – Drive over ramp allows for full 102″ use.


Treated 2×8 and 2×10. OPTIONAL – 6″ interlocking Aluminum Floor. (We believe it’s the strongest on the market.)

Aluminum 2″x6″ – double hollow tube

Stylish Wolverine graphics

Grease Fittings
On spindles that lubricate both inner and outer bearing

12” – 6 bolt hubs

License Plate Holder
Black metal – LED Lighted license plate holder. (View)

All LED – Lifetime warranty. Every lighted location including 2 amber and 2 reds on both sides. 2 long slimline tail lights and 3 lights identification bar in the back, back-up lights on rear and sides. Last but not least is the license plate light. Backed by a lifetime limited warranty

Heavy Duty (weight 56# each and will hold anything you can fit on this trailer within specifications) – 2 included – 7′ in length and 16″ wide aluminum – grooved (front & rear)  -stored in rear of trailer. OPTIONAL – Heavy-Duty Equipment Ramps. Stronger than our heavy duty ramps and stored vertically on the rear of the trailer.

Rub/Grab Rail/Stake Pockets
OPTIONAL 5/8″ thick, Hi-tensile T-6 alloy, 3 inch wide. Stake pockets every 24″ and will fit a standard 2×4.

Running Board
Step pad in front and 4′ easy access running board behind fender. (Only available on 22′ and up)

Safety Chains
The safety chain is an upgraded #7,600 breaking strength chain. It absolutely costs a bit more but so well worth the extra few bucks. Not only that, but the S hooks are big enough to actually hook on to something. We have seen chains so small that they won’t hold very much at all. 

Safety Feature
Hi-Visibilty DOT reflective conspicuity tape.

Side Rails

Stabilizer Jacks
Adjustable drop-leg stabilizer jacks located on the dovetail. This allows you to load the trailer when unhooked from vehicle. It will also raise the tires off the ground to accommodate tire removal and inspections.

Double eye 4 leaf spring. 5200# rated at 3500#. 

Radial Tires. 225×15 (ST22575R15) – 6 lug – Rated E – Max Load 2830# per tire. Spare included. A “No Excuse Guarantee”, Five (5) year warranty against manufacturers defect, 2 Year Free Roadside Assistance, (Tires must be registered with tire manufacturer to activate warranty and roadside assistance)

Tongue Jack
Capacity 3,000# OPTIONAL – 8000# Square Drop Leg Jack, Adjustable Pintle Hooks, Higher Capacity up to 12,000# Singular or #24,000 Combined Drop Leg Jack,

Long-lasting yellow zinc u-bolts through-out.

Custom aluminum alloy 15″

Select Model Below for Full Specs
Series 6 718 • Deck Length: 18′, Overall Length: 22′ 6″, Deck Width: 84″ between fenders, Overall Width: 102″, Weight Empty: 1400lbs GVWR: 10,000lbs

Series 6 720 • Deck Length: 20′, Overall Length: 24′ 6″, Deck Width: 84″ between fenders, Overall Width: 102″, Weight Empty: 1580lbs GVWR: 10,000lbs

Series 6 722 • Deck Length: 22′, Overall Length: 26′ 6″, Deck Width: 84″ between fenders, Overall Width: 102″, Weight Empty: 1760lbs GVWR: 10,000lbs

Series 6 724 • Deck Length: 24′, Overall Length: 28′ 6″, Deck Width: 84″ between fenders, Overall Width: 102″, Weight Empty: 1940lbs GVWR: 10,000lbs
*weight base on standard wood floor

Scroll to Top